Home / Water / 24-foot round pool
24 ft round above-ground pool

24-Foot Round Pool Water Weight Calculator

Start with the actual average water depth, or enter the listed capacity from your pool manual. Add the pool, frame, equipment and people to estimate the full planning load.

Water-only range at common fill depths
98,782–112,894 lb

A 24-foot circle at 3.5 to 4.0 feet average water depth holds about 11,844–13,536 gallons. Use your manual or measured water depth for the actual pool.

Calculate this pool setup

Use the listed capacity from your own pool manual when available. Nominal wall height is not the same as average water depth.
Pool volume
Water weight
Total planning load
Average footprint load
Fill time
Drain time
Water cost
Metric water weight

Pool project summary

Safety check: Some above-ground pools 48 inches or taller with exterior compression straps were recalled because the straps could create a child foothold. Check current pool recall status and verify your model before use.

Compare nearby round pool sizes

The table uses the water depth currently entered above. It is a geometric comparison, not a manufacturer capacity chart.

DiameterDepth usedEstimated gallonsWater weight

What the number helps you check

Filling and draining

Use your measured hose or pump flow rate. A roughly 12,500-gallon pool takes about 20 hours 50 minutes at 10 gallons per minute, before interruptions.

Ground preparation

The pool should follow the manufacturer’s level-ground and base-preparation instructions. The average load shown here does not describe soil bearing, slope, erosion or frame-leg pressure.

Decks and raised surfaces

Do not place a pool on a deck, balcony, roof or raised platform based on this calculator. The water alone weighs tens of thousands of pounds.

Nominal height versus water depth

A 52-inch wall does not mean 52 inches of water. Use the model’s listed capacity or measure the actual average water depth.

Related pool and water tools